How to Fix a Paper Jam in a Printer

When working with any printer, it is unavoidable that you will experience a paper jam. Coming up next is a general guide for expelling paper that has turned out to be stuck in at least one areas. Albeit most current printers are comparative in plan, you may need to make slight changes in accordance with the accompanying advances, contingent upon the brand and model of your printer.

Locate and remove any paper stuck in the loading tray

1.  Remove any loose paper in the loading tray.
2.  Press the Resume button on the front of the printer.
3.  Remove stuck paper one sheet at a time, starting in the middle.
4.  Check for any remaining bits of paper.

Clearing the jam from rear of the printer 

  On the off chance that you can't get to the paper jam from the stacking plate, adhere to the directions to clear the paper from the back of the printer. More often than not, the back of the printer has either a back access entryway or a two-sided printing extra.

Removing a rear access panel 

1. Locate the knob or access tab on the back of the printer by or on the panel itself. If it's a knob, move it to the Unlocked position.
2. Remove the panel and carefully pull out the jammed paper.
3. Locate and clear away any small bits of paper that remain.
4. Replace and secure the rear panel.

Remove the two-sided printing accessory to clear the paper jam

1. Press both RELEASE buttons on either end of the module at the same time and remove it.
2. Remove the panel and carefully pull out the jammed paper.
3. Locate and clear away any small bits of paper that remain.
4. Push the module back on and snap it into place.
5. Press the button on top of the module and open the door.
6. Remove the panel and carefully pull out the jammed paper.
7. Locate and clear away any small bits of paper that remain.
8. Close the rear module door.

Pulling paper out from under the front cover

On the off chance that all the past advances have fizzled, you may endeavor to evacuate the stuck paper by hauling it out from under the title page Cautiously and Gradually. Keep in mind, as expressed over, this progression is commonly not suggested and should just be a final retreat.

Ensure the printer carriage can move freely

1.  Disconnect the printer from power by unplugging the power cord from the power outlet.
2. Watch the carriage to see if it moves fully to the right side of the printer and out of sight. Do not force the carriage to move if it's stuck, as this may damage your printer.
3. Carefully remove the ink cartridge(s).
4. Without removing the drawer, remove any paper in the loading tray.
5. Remove the two-sided printing accessory (module) or rear access door.
6. With your fingers, rotate the rollers toward the top of the printer for three full rotations.
7. Replace the two-sided printing accessory (module) or rear access door.
8. Replace the ink cartridges.
9. Plug in and turn on your printer.

Reloading and testing the printer

When you've evacuated the jam, cleaned up any outstanding bits of paper, and guaranteed that the print carriage can move without issue, test your printer. 

1. Put some inkjet paper into the loading tray and slide it into place.
2. Print a test page by performing a self-test. Usually, a self-test can be initiated by pressing and holding the Resume button until the printer starts printing.

Continued problems? Possible printer hardware problems

 On the off chance that the printer guarantees there is as yet a paper jam in the wake of experiencing the means over, your printer may have an equipment issue that is causing the issues. A failing roller or parts in the paper feed instrument can make a printer think it has a paper jam.

On account of an equipment issue, it might be conceivable to have the printer fixed. Nonetheless, because of the low expenses of printers today, it is frequently less expensive to purchase another printer as opposed to having a printer fixed.

Preventing a printer paper jam

As referenced before, paper jams are a certainty over the life of your printer. Be that as it may, in case you're experiencing continuous paper sticks, the accompanying advances may help avoid them.

1.  If your printer has a paper tray, do not fill the tray to capacity. Overfilling the paper tray is frequently the cause of paper jams.
2. Many printers have sliding mechanisms that allow different types and sizes of paper to be fed into the printer. If the slider is not properly positioned, it can cause a paper jam.
3. Use standard office paper. Folded, labeled, and specialty paper can often cause jams because they have irregular dimensions. If you're uncertain which types of paper your printer accepts, consult the printer documentation.
4. If you are printing multiple pages, do not mix the paper sizes.
5. Make sure your printer paper is correctly seated into the slot or tray.
6. Examine the printer for any debris before printing. Previous paper jams, torn paper, printing labels or other foreign objects in the printer can cause reoccurring jams. 
   
   
   
   

If you come across any of the issue then without wasting time wandering here and there make sure to dial Canon Printer Support Number 1-800-289-8149 immediately. Your request will be entertained instantly by the customer care executive who is dealing with such issues from a long time.

Canon Error Code You can see this blog What Would I do of Canon Mp230 Printer error code 1300?  The best phone number is that which could be reached round the clock. Mostly for this purpose toll free help directory is prescribed by the users where authentic canon printer support phone number 1-800-289-8149 is available easily. So get this number and take the next step to dial it for fetching quality help of the experienced executives of the canon printer.